کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9708811 | 1466791 | 2005 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Micro-hole fabrication by mechanical punching process
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Micro-hole fabrication by mechanical punching process Micro-hole fabrication by mechanical punching process](/preview/png/9708811.png)
چکیده انگلیسی
In the present investigation, micro-hole punching was studied, and the standard punching condition was scaled down to produce 25 μm size holes. For this, a micro punching press was designed and assembled, meeting requirements of process accuracy for 25 μm size holes. Tungsten carbide tooling sets were designed and fabricated by micro machining techniques. Three different size holes of 100, 50, and 25 μm in diameter were punched successfully on thin metallic foils such as brass and stainless steel of 100, 50, and 25 μm in thickness, respectively. Punched holes were examined in terms of surface qualities and results were analyzed in connection with shear fracture behavior. The results in this paper show that the mechanical punching process is promising to produce high quality holes even in the micro scale application.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 170, Issue 3, 30 December 2005, Pages 593-601
Journal: Journal of Materials Processing Technology - Volume 170, Issue 3, 30 December 2005, Pages 593-601
نویسندگان
Byung-Yun Joo, Sung-Han Rhim, Soo-Ik Oh,