کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9708839 | 1466792 | 2005 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Study of the effects of die geometry on deformation in the radial forging process
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Radial forging is an open forging process used for reducing the diameters of shafts, tubes, stepped shafts and axels, and creating internal profiles for tubes such as rifling of gun barrels. Usually a mandrel is used inside a tubular workpiece to create internal profile and/or size the internal diameter, but the process can also be performed without a mandrel when workpiece geometry does not allow utilizing it or the internal surface quality is not critical. Moreover, in stepped shafts and tubes, often there is a fillet connecting two different sections. If it is possible to produce that fillet during the forging process, the process could be more cost effective. So, in this paper, four different shapes for the die inlet zone including linear, convex, concave and hybrid surfaces are considered and the effects of die shape on the deformation pattern and quality of radially forged products are studied. In this study, slab method analysis is used to obtain the deformation pattern, pressure distribution and the position of neutral plane in both cases; with mandrel and without it.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 170, Issues 1â2, 14 December 2005, Pages 156-163
Journal: Journal of Materials Processing Technology - Volume 170, Issues 1â2, 14 December 2005, Pages 156-163
نویسندگان
A. Ghaei, M.R. Movahhedy, A. Karimi Taheri,