کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9952779 | 1463451 | 2018 | 19 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Carbon nanotubes for enhanced interface of fiber metal laminate
ترجمه فارسی عنوان
نانولوله های کربنی برای بهبود رابط ورقه ورقه فیبر فلزی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
The improvement in the bonding strength of fiber metal laminate is proposed by the inclusion of multi walled carbon nanotubes (MWCNTs). The bonding strength of fiber metal laminate (FML) was studied using lap joint testing method. In the first stage the surface treatment of the aluminum sheets was carried out by varying the chromic acid bath temperature by 50, 60, 70 and 80â¯Â°C. The temperature of the bath at 50â¯Â°C has been resulted in superior surface texturing and higher bonding strength as verified by lap joint test of FML. The ratio of potassium dichromate in the chromic acid solution was also varied from 1.0 part to 2.5 part by 0.5. In the second stage, NH2 functionalized MWCNTs were used in 1.0, 2.0 and 3.0â¯wt% of the epoxy matrix of E-glass fiber composite to improve the bonding strength of the FML joint. The results have shown that the strength of the E-glass/epoxy and aluminum interface has been improved by the inclusion of NH2-MWCNTs, when the samples were cured under vacuum compression as compared to the similar samples when cured under atmospheric pressure.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 86, November 2018, Pages 29-34
Journal: International Journal of Adhesion and Adhesives - Volume 86, November 2018, Pages 29-34
نویسندگان
A.A. Khurram, Rizwan Hussain, Hassnain Afzal, Ahsan Akram, Tayyab Subhanni,