Keywords: حالت دوم; Adhesive; Cohesive law; Cohesive layer; Constrain; Dilatation; Mode II; Shear fracture; Shear hackles; Simple shear;
مقالات ISI حالت دوم (ترجمه نشده)
مقالات زیر هنوز به فارسی ترجمه نشده اند.
در صورتی که به ترجمه آماده هر یک از مقالات زیر نیاز داشته باشید، می توانید سفارش دهید تا مترجمان با تجربه این مجموعه در اسرع وقت آن را برای شما ترجمه نمایند.
در صورتی که به ترجمه آماده هر یک از مقالات زیر نیاز داشته باشید، می توانید سفارش دهید تا مترجمان با تجربه این مجموعه در اسرع وقت آن را برای شما ترجمه نمایند.
Keywords: حالت دوم; Backface strain monitoring; Bonded joints; Crack propagation; ELS; Mode II;
Keywords: حالت دوم; Mode I; Mode II; Mixed mode; Tensile shear; Compressive shear; Fracture initiation angle;
Keywords: حالت دوم; Fatigue crack growth; Mode II; Friction; Branching; Closure;
Keywords: حالت دوم; Delamination; Peridynamics; Mode I; Mode II
Keywords: حالت دوم; Mode II; Shear; Strength; Experimental methods; Thin-walled structures;
Keywords: حالت دوم; Fracture mechanics; Mode I; Mode II; Timber; Radiata Pine; Laminated Veneer Lumber
Keywords: حالت دوم; Carbon reinforced composites; Fracture mechanics; Mode I; Mode II; Cohesive zone modelling;
Mode II fracture characterization of wood using the Four-Point End-Notched Flexure (4ENF) test
Keywords: حالت دوم; Wood; Fracture characterization; Mode II; 4ENF test;
Determination of mode II cohesive law of bovine cortical bone using direct and inverse methods
Keywords: حالت دوم; Bovine cortical bone; Cohesive law; Mode II; End notched flexure;
Prediction of effective mode II fatigue crack growth threshold for metallic materials
Keywords: حالت دوم; Effective threshold; Mode II; Crack deflection; Ti6Al4V; Zirconium;
An efficient methodology for the experimental characterization of mode II delamination growth under fatigue loading
Keywords: حالت دوم; Mode II; Delamination; Testing method; Fatigue; 3-ENF; Composites;
Bridging mechanisms of through-thickness reinforcement in dynamic mode I&II delamination
Keywords: حالت دوم; Z-pin; Mode I; Mode II; Delamination; Dynamic;
An automated methodology for mode II delamination tests under fatigue loading based on the real time monitoring of the specimen's compliance
Keywords: حالت دوم; Delamination; Fatigue; Mode II; Compliance; Composites;
Mode II fatigue delamination of carbon/epoxy laminates using the end-notched flexure test
Keywords: حالت دوم; Polymer matrix composites; Delamination; Fatigue; Fracture; Mode II
Fracture assessment of VO-notches under mode II loading: Experiments and theories
Keywords: حالت دوم; Brittle fracture; VO-notch; Notch fracture toughness; Mode II; Brazilian disk
Quasi-static mode II fracture tests and simulations of Z-pinned woven composites
Keywords: حالت دوم; Fracture; Woven composites; Mode II; Cohesive models; Z-pins
Frictional effect in mode II delamination: Experimental test and numerical simulation
Keywords: حالت دوم; Delamination; Fracture; Mode II; Interface model; Friction;
Characterization of composite bonded joints under pure mode II fatigue loading
Keywords: حالت دوم; Composites; Bonded joints; Fatigue; Mode II; End-Notched Flexure test
Bone fracture characterization using the end notched flexure test
Keywords: حالت دوم; Bone; Mode II; Fracture characterization; End notched flexure test; Cohesive zone modeling
Instrumented end notched flexure – Crack propagation and process zone monitoring Part II: Data reduction and experimental
Keywords: حالت دوم; End notched flexure; Mode I; Mode II; Process zone; Strain gauges
Instrumented End Notched Flexure – Crack propagation and process zone monitoring. Part I: Modelling and analysis
Keywords: حالت دوم; Bonded joints; End Notched Flexure; Mode II; Strain gauges
Influence of the crack plane asymmetry over GII results in carbon epoxy ENF specimens
Keywords: حالت دوم; Fracture; Modeling; Mode II; FEM
3D atomistic simulation of fatigue behavior of a ductile crack in bcc iron loaded in mode II
Keywords: حالت دوم; 3D molecular dynamics; Bcc iron; Fatigue crack growth; Mode II;
Discussion of: “Mode II fracture mechanics properties of wood measured by the asymmetric four-point bending test using a single-edge-notched specimen of Hiroshi Yoshihara Eng. Frac. Mech. 75 (2008) 4727–4739”
Keywords: حالت دوم; Mode II; Wood; Asymmetric four-point bending test; Single edge-notched beam test
Bilinear approximations to the mode II delamination cohesive law using an inverse method
Keywords: حالت دوم; Delamination; Mode II; Cohesive law; Inverse method
Fracture characterization of bone under mode II loading using the end loaded split test
Keywords: حالت دوم; Bone; Fracture characterization; Mode II; End loaded split test;
Measurement of mode I and mode II rock dynamic fracture toughness with cracked straight through flattened Brazilian disc impacted by split Hopkinson pressure bar
Keywords: حالت دوم; Cracked straight through flattened Brazilian disc; Rock dynamic fracture toughness; Mode I; Mode II; Mode mixture ratio; Dynamic size effect;
Fracture behaviour of a rapidly cured polyethersulfone toughened carbon fibre/epoxy composite
Keywords: حالت دوم; Epoxy resin; Fracture toughness; Mode I; Mode II; Voids; Fibre bridging
Modeling end notched flexure tests to establish cohesive element Mode II fracture parameters
Keywords: حالت دوم; Mode II; Fracture; Polyurea; Steel; Finite element; Cohesive element
Nonlinear interface shear fracture of end notched flexure specimens
Keywords: حالت دوم; Cohesive zone model (CZM); Bonded joint; Interface shear fracture; Mode II; Composites; Analytical solution; Arbitrary nonlinear cohesive laws; ENF
Straightforward comparison of fatigue crack growth under modes II and III
Keywords: حالت دوم; Mode II; Mode III; Fatigue crack propagation; Mixed mode; Fractography; Morphological patterns
Local approach to fatigue cracks bifurcation
Keywords: حالت دوم; Crack; Fatigue; Bifurcation; Mode II; Non-proportional loading
Influence of bending rotations on three and four-point bend end notched flexure tests
Keywords: حالت دوم; Delamination; Three-point end notched flexure test; Four-point end notched flexure; Mode II; Energy release rate
Mode II fracture mechanics properties of wood measured by the asymmetric four-point bending test using a single-edge-notched specimen
Keywords: حالت دوم; Mode II; Wood; Asymmetric four-point bending test; Single-edge-notched specimen; Finite element calculation
Equivalent crack based analyses of ENF and ELS tests
Keywords: حالت دوم; Composites; Mode II; End-Notched Flexure; End-Loaded Split; Equivalent crack methods
A material and environment-dependent criterion for the prediction of fatigue crack paths in metallic structures
Keywords: حالت دوم; Fatigue; Crack; Mode II; Friction; Bifurcation
Estimation of the plastic zone by finite element method under mixed mode (I and II) loading
Keywords: حالت دوم; Mode I; Mode II; Mixed mode I + II; Stress intensity factors; Plastic zone
Finite element analysis of a center crack specimen warm pre-stressed under different modes of loading
Keywords: حالت دوم; 02.70.D; 62.20.M; 46.30.NCrack; Warm pre-stressing; Finite element analysis; Mode I; Mode II
Mode II wood fracture characterization using the ELS test
Keywords: حالت دوم; Wood; Mode II; End loaded split; R-Curve; Data reduction scheme
Edge dislocation dipole emission from a blunt crack tip and its morphological effects
Keywords: حالت دوم; Blunt crack; Mode I; Mode II; Dipole emission; Tip radius
Mode II fracture behaviour monitoring for composite laminates using embedded fibre Bragg grating sensors
Keywords: حالت دوم; Delamination; Mode II; ENF test; Stress concentration; Embedded optical fibre sensor; Fibre Bragg grating (FBG) sensor
Experimental investigation on the influence of crack front to fiber orientation on fatigue delamination growth rate under mode II
Keywords: حالت دوم; Composite laminate; Fatigue testing; Mode II; Delamination; Energy release rate
Mode II fatigue crack growth from delamination in unidirectional tape and satin-woven fabric laminates of high strength GFRP
Keywords: حالت دوم; Mode II; Fatigue; Delamination; GFRP; Stress-ratio; Energy release rate; Crack propagation; Interlaminar shear; Composite material
Numerical analysis of the ENF test for mode II wood fracture
Keywords: حالت دوم; A. Wood; B. Fracture toughness; Mode II; C. Numerical analysis
Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf
Keywords: حالت دوم; Polymer–matrix composites; Fatigue crack growth; Delamination; Self-same epoxy interleaf; Mode I; Mode II
Mode II fracture testing of composites: a new look at an old problem
Keywords: حالت دوم; Composite; Mode II; Effective crack length
A new jig for mode II interlaminar fracture testing of composite materials under quasi-static and moderately high rates of loading
Keywords: حالت دوم; Mode II; Interlaminar fracture; Impact testing
Equivalent crack based mode II fracture characterization of wood
Keywords: حالت دوم; Mode II; End notched flexure test; Fracture toughness; Wood; Cohesive model
Numerical evaluation of the effects of friction and geometric nonlinearities on the energy release rate in three- and four-point bend end-notched flexure tests
Keywords: حالت دوم; Mode II; Delamination; Energy release rate; Energy balance; Finite element