کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10142080 | 1646090 | 2019 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Printability of gas atomized Mo-Si-B powders by laser metal deposition
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Mo-Si-B alloys, as a more and more frequently considered high-temperature material, face the challenge of machining complex shapes. In the present work, the feasibility of printing pre-alloyed Mo-Si-B powder materials via laser metal deposition (LMD) process was firstly demonstrated. Mo-Si-B powder was manufactured via gas atomization (GA) process out of solid raw materials meeting the requirements for additive manufacturing (AM) regarding flowability and particle size. Investigations of the powder particles after GA and detailed analyses of the printability and microstructural evolution of the multi-phase Moss-Mo3Si-Mo5SiB2 built are presented. As a result, distinct zones resulting from the layer-wise LMD process were observed next to a microstructure of primarily solidified Moss phases embedded in fine dispersed eutectic regions. The hardness of the LMD processed material is shown to be comparable with Mo-Si-B alloys produced by ingot metallurgy (IM).
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Refractory Metals and Hard Materials - Volume 78, January 2019, Pages 123-126
Journal: International Journal of Refractory Metals and Hard Materials - Volume 78, January 2019, Pages 123-126
نویسندگان
J. Schmelzer, S.-K. Rittinghaus, A. Weisheit, M. Stobik, J. Paulus, K. Gruber, E. Wessel, C. Heinze, M. Krüger,