کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
10226520 1701275 2018 25 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Tester for tensile shear evaluation of metal-polymer single lap joints
ترجمه فارسی عنوان
تستر برای ارزیابی برشی کششی اتصالات تک لبه فلز / پلیمر
کلمات کلیدی
تک لبه مفصل، تست برشی کششی، پیوستن مستقیم تستر کششی،
ترجمه چکیده
تست برشی کششی کلی برای یک جفت تک لبه باعث ایجاد تغییر شکل الاستیک ناخواسته در یک نمونه می شود. لازم است این نوع تغییر شکل را برای ارزیابی مقاومت برشی صحیح یک مفصل کاهش دهیم. در این مطالعه، یک تستر کششی جدید ایجاد کردیم که تغییر شکل ناخواسته را کاهش می دهد. ما اثر تستر توسعه یافته با استفاده از یک روش عنصر محدود را تحلیل کردیم و آزمایش تستر جدید را با تستر کششی معمولی مقایسه کردیم. نتایج نشان می دهد که تستر جدید، تغییر شکل یک لبه لبه را کاهش داده و نسبت ثابت برش به استرس عمودی را حفظ می کند، حتی اگر از مقادیر مختلفی از مدول یانگ استفاده کردیم. نتایج این مطالعه ما را قادر می سازد تا مقاومت برشی صحیح اتصالات مستقیم فلز و پلیمر را بررسی کنیم و به درک خواص اتصالات مستقیم کمک کنیم.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
The general tensile shear test for a single lap joint produces unwanted elastic deformation in a specimen. It is necessary to reduce this type of deformation to evaluate the correct shear strength of a joint. In the study, we developed a new tensile tester that reduces unwanted deformation. We analyzed the effect of the developed tester by using a finite element method and experimentally compared the new tester with a conventional tensile tester. The results indicated that the new tester reduced the deformation of a single lap joint and maintained a constant ratio of the shear to vertical stress even if we used several materials with different values of Young's modulus. The results of this study will enable us to evaluate the correct shear strength of metal-polymer direct joints and help promote the understanding of the properties of direct joints.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Precision Engineering - Volume 54, October 2018, Pages 321-326
نویسندگان
, , ,