کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10244525 | 47692 | 2005 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dimethyl carbonate production via the oxidative carbonylation of methanol over Cu/SiO2 catalysts prepared via molecular precursor grafting and chemical vapor deposition approaches
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
کاتالیزور
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The influence of catalyst synthesis method and Cu source on the activity and selectivity of Cu/SiO2 catalysts for the gas-phase oxidative carbonylation of methanol to dimethyl carbonate (DMC) is reported. [CuOSi(OâtBu)3]4, [CuOâtBu]4, and CuCl were used as precursors to produce highly dispersed silica-supported copper. XANES and EXAFS characterization prior to reaction (but after thermal treatment under He) showed that Cu in the catalysts prepared with CuCl and [CuOSi(OâtBu)3]4 was present primarily as isolated Cu(I) species, whereas [CuOâtBu]4 produced 1-nm Cu particles. During the catalytic reaction, the Cu in catalysts prepared from CuCl and [CuOSi(OâtBu)3]4 formed highly dispersed CuO moieties, whereas the Cu in catalysts prepared from [CuOâtBu]4 formed a cuprous oxide layer over a Cu(0) core. For comparison, poorly dispersed Cu on silica was prepared via traditional incipient wetness impregnation with Cu(NO3)2. It was found that activity for DMC formation increased with increasing Cu dispersion. The selectivity for DMC formation (relative to CO) decreased with decreasing Cu dispersion when the original state of the Cu was Cu(0) directly preceding reaction conditions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Catalysis - Volume 230, Issue 1, 15 February 2005, Pages 14-27
Journal: Journal of Catalysis - Volume 230, Issue 1, 15 February 2005, Pages 14-27
نویسندگان
Ian J. Drake, Kyle L. Fujdala, Alexis T. Bell, T. Don Tilley,