کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10244730 | 47700 | 2005 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The methanol-to-olefins conversion over zeolite-coated ceramic foams
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
کاتالیزور
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: The methanol-to-olefins conversion over zeolite-coated ceramic foams The methanol-to-olefins conversion over zeolite-coated ceramic foams](/preview/png/10244730.png)
چکیده انگلیسی
The use of ZSM-5-coated ceramic foam packing in the conversion of methanol to olefins showed substantial activity and selectivity improvements as compared with conventional extruded zeolite pellets. The formation of propylene was particularly favored over the coated foams. At 380â°C the amount of ethylene and propylene produced per unit volume of reactor packing was 2.5 times higher over the zeolite-coated foams than over pellets. However, at a lower temperature (320â°C) and higher space velocities the zeolite-coated foams were less active than the zeolite pellets. This behavior could be explained by the autocatalytic hydrocarbon pool mechanism. The species involved in the autocatalytic process, which are in equilibrium with the products, were decomposed and flushed off when the space velocity was high or the characteristic size of the catalyst bulk was too small. Thus the zeolite coat has to be optimized to ensure simultaneously a high effectiveness factor and sufficient buildup of catalytic species.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Catalysis - Volume 231, Issue 1, 1 April 2005, Pages 194-200
Journal: Journal of Catalysis - Volume 231, Issue 1, 1 April 2005, Pages 194-200
نویسندگان
F.C. Patcas,