Liquid re-circulation in turbulent vertical pipe flow behind a cylindrical bluff body and a ventilated cavity attached to a sparger

The LDV results of the cylindrical bluff body and the ventilated cavity were compared with the fully predictive model of the velocity distribution in the vortex proposed by Thorpe et al. (2001) and good agreement was found in both cases. The model also agreed well with the data of van Hout et al. (2002) for a Taylor bubble rising in stagnant liquid in a 0.025 m internal diameter pipe. The CFX simulations of Thorpe et al. (2001) carried out for a 0.050 m internal diameter pipe, agreed well with the experimental data of the cylindrical bluff body, the ventilated cavity and the data obtained by van Hout et al. (2002) when correlating the results in the appropriate dimensionless form. Our analysis showed that the maximum axial re-circulation velocity in the centre of the vortex ring was directly proportional to the mean velocity in the annulus at the base of the cylindrical bluff body, the ventilated cavity or the Taylor bubble. The proportionality constant for all cases was found to be approximately 0.38 confirming the value proposed by Thorpe et al. (2001).