کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10292838 | 511558 | 2010 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Source separation techniques applied to the detection of subsurface defects in the eddy current NDT of aeronautical lap-joints
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Source separation techniques applied to the detection of subsurface defects in the eddy current NDT of aeronautical lap-joints Source separation techniques applied to the detection of subsurface defects in the eddy current NDT of aeronautical lap-joints](/preview/png/10292838.png)
چکیده انگلیسی
This paper investigates the application of two source separation techniques, principal component analysis and independent component analysis, to process the data from the inspection of riveted lap joints by eddy currents. An eddy current array sensor is designed for the rapid inspection of lap-joints and used to test a set of flawed rivet configurations featuring 1-10Â mm notches, buried down to a 4Â mm depth. Implementation methods are proposed for processing such eddy current data by means of both the considered source separation techniques. The signal processing results obtained from the experimental data are compared in terms of source separation efficiency and detection using a receiver operating characteristic approach. In the light of this study, both the techniques appear to be efficient. However, the principal component analysis provides better defect detection results, especially for deeply buried defects.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: NDT & E International - Volume 43, Issue 7, October 2010, Pages 606-614
Journal: NDT & E International - Volume 43, Issue 7, October 2010, Pages 606-614
نویسندگان
P.-Y. Joubert, E. Vourc'h, A. Tassin, Y. Le Diraison,