کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10296022 | 513695 | 2005 | 24 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of small models of large cylinders with extensive welding for buckling experiments
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Cylindrical shells in large steel silos and tanks are commonly constructed from a large number of curved panels joined by many circumferential and meridional welds (referred to as the panel method hereafter). The extensive use of welding in these shells is a unique feature not previously studied in laboratory buckling experiments due to the great difficulty in fabricating realistic small-scale model shells. This paper presents an innovative technique for the fabrication of small models of such large steel cylindrical shells constructed from many welded panels. The experimental set-ups to implement this technique in the laboratory are also described. The new technique consists of two stages: (a) production of a high quality model by rolling two sheets (or a single sheet) and welding along the meridional seams; and (b) 'welding' in the form of controlled heat input in a required pattern of circumferential and meridional 'welds' on the central portion of the shell surface. The imperfections in an example specimen are also examined to show that they have a realistic pattern. The observed buckling behavior of this specimen is presented and discussed. The specimen buckled at a very low load, confirming that the welding-induced imperfections in such shells are severely detrimental to the buckling strength.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin-Walled Structures - Volume 43, Issue 7, July 2005, Pages 1091-1114
Journal: Thin-Walled Structures - Volume 43, Issue 7, July 2005, Pages 1091-1114
نویسندگان
J.G. Teng, X. Lin,