An energy efficient middleware for an ad-hoc AAL wireless sensor network

DIA (Dispositivo Inteligente de Alarma, in Spanish) is an AAL (Ambient Assisted Living) system that allows to infer a potential dangerous action of an elderly person living alone at home. This inference is obtained by a specific sensorisation with sensor nodes (portables and fixes) and a reasoning layer embedded in a PC that learns of the users behaviour patterns and advices when actual one differs significantly of the normal patterns. In AAL systems, energy is a limited resource therefore sensor devices need to be properly managed to conserve energy. In this paper, we introduce the design and implementation of innovative and specific mechanisms at the sensory layer middleware which is capable of, first to discriminate spurious motion detections assuming that these signals do not resemble the patterns of real motion detections and, second to reduce the dynamics of messages by a sensor signal processing in order to compress the whole information in one single event. The middleware achieves power saving by modifying the raw information from sensors and adapting it to the predefined semantic of the reasoning layer. It manages the important task of data processing from sensors (raw information), and transfers the pre-processed information into the top layer of reasoning in a more energy efficient way. We also address the trade-off between reducing power consumption and reducing delay for incoming data. We present results from experiments using our implementation of these mechanisms at the middleware that comprises from node firmware to the PC driver. The number of messages of the proposed method with respect to the raw data is reduced by approximately 98.5%. The resources used in the PIR signal processing is reduced by approximately 85%. The resulting delay introduced is small (10-19 s) but system dynamics is slow enough to avoid contextualisation errors or reduction of system performance. We consider these results as very satisfactory.