کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10384819 | 881881 | 2005 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Surface generation and boundary lubrication in bulk forming of aluminium alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Surface generation and boundary lubrication in bulk forming of aluminium alloy Surface generation and boundary lubrication in bulk forming of aluminium alloy](/preview/png/10384819.png)
چکیده انگلیسی
The electrical contact resistance is measured between the tool and workpiece during plane strain compression of aluminium strip coated with a non-conductive oxide film produced by anodising. Results are correlated with the observed oxide topography after the test. The purpose is to investigate the mechanism of the development of close metal-to-metal contact, the associated material transfer and their effects on the friction coefficient under boundary lubrication conditions. Initially the anodised layer provides electrical insulation between the tool and the strip but, as deformation proceeds, this layer breaks up and fresh metal is extruded through the cracks formed, causing a sharp fall in electrical resistance. Details of this behaviour are explored, showing a dependence not only on strip reduction, but also on the base oil used and the presence of boundary additives. The change in the behaviour is tracked as a transfer layer builds up on the tool.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volume 258, Issue 10, May 2005, Pages 1567-1576
Journal: Wear - Volume 258, Issue 10, May 2005, Pages 1567-1576
نویسندگان
H.R. Le, M.P.F. Sutcliffe, P. Wang, G.T. Burstein,