کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10409078 | 893935 | 2007 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Preparation and electrical properties of copper-nickel manganite ceramic derived from mixed oxalate
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Cu0.3Ni0.66Mn2.04O4 negative temperature coefficient (NTC) ceramic was prepared using mixed oxalate-derived oxide powder. The mixed oxalate was synthesized by milling a mixture of copper acetate, nickel acetate, manganese acetate and oxalic acid at room temperature. The spinel-structured oxide powder was obtained by calcining the mixed oxalate in air at 800 °C for 2 h. The oxide powder compact was sintered at a relatively low temperature of 1100 °C for 2.5 h, attaining a relative density of â¼98%. The sintered ceramic had a specific resistivity Ï25 °C of 63.3 Ω cm and the thermal constant B25/50 of 2740 K, and exhibited much reduced shift in electrical resistivity of â¼5% after annealing at 150 °C for 500 h in air. The difference in the electrical property of the as-prepared ceramic is attributed to the fine-grained microstructure and the lower sintering temperature used in the present study.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 135, Issue 2, 15 April 2007, Pages 472-475
Journal: Sensors and Actuators A: Physical - Volume 135, Issue 2, 15 April 2007, Pages 472-475
نویسندگان
Jun-Feng Gao, Dao-Lai Fang, Zhong-Bing Wang, Ping-Hua Yang, Chu-Sheng Chen,