کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10409672 | 894101 | 2005 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Micro-ejector to supply fuel-air mixture to a micro-combustor
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Micro-ejector to supply fuel-air mixture to a micro-combustor Micro-ejector to supply fuel-air mixture to a micro-combustor](/preview/png/10409672.png)
چکیده انگلیسی
Micro-ejectors to supply fuel-air mixture to micro-combustors were fabricated and tested. The ejector sucks air using the jet of vaporized liquid gas ejected from a nozzle by its own vapor pressure, and needs no moving part and electric power supply. A tapered nozzle and a Laval nozzle were fabricated by the deep reactive ion etching of silicon. Using the Laval nozzle, which produces supersonic flow, the performance of the ejector becomes high, and the maximum entrainment ratio, which is defined as the volumetric ratio between ejected fuel flow and sucked air flow, reached 36.8. This entrainment ratio is stoichiometrically enough for the complete combustion of butane (>31). At this time, the flow rate of fuel-air mixture was 394Â sccm. We investigated several characteristics of the prototyped ejectors. The most important problem that we found is that entrainment ratio considerably drops, when several tens Pa pressure is applied at the exit of the ejector by the pressure loss of a combustor. However, the performance of the ejector will be improved by optimizing the design of the Laval nozzle according to the supplied pressure of fuel.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 119, Issue 2, 13 April 2005, Pages 528-536
Journal: Sensors and Actuators A: Physical - Volume 119, Issue 2, 13 April 2005, Pages 528-536
نویسندگان
Daisuke Satoh, Shuji Tanaka, Kazushi Yoshida, Masayoshi Esashi,