کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10417573 | 902518 | 2005 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Parametric optimization of powder mixed electrical discharge machining by response surface methodology
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In the present work, a study has been made to optimize the process parameters of powder mixed electrical discharge machining (PMEDM). Response surface methodology has been used to plan and analyze the experiments. Pulse on time, duty cycle, peak current and concentration of the silicon powder added into the dielectric fluid of EDM were chosen as variables to study the process performance in terms of material removal rate and surface roughness. Experiments are performed on a newly designed experimental setup developed in the laboratory. The results identify the most important parameters to maximize material removal rate and minimize surface roughness. The recommended optimal process conditions have been verified by conducting confirmation experiments.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 169, Issue 3, 1 December 2005, Pages 427-436
Journal: Journal of Materials Processing Technology - Volume 169, Issue 3, 1 December 2005, Pages 427-436
نویسندگان
H.K. Kansal, Sehijpal Singh, P. Kumar,