Free-form curves cutting using flexible circular saw

A flexible circular saw, which can be used in a novel machining process for high-speed carbon fiber-reinforced plastic (CFRP) plate cutting, was developed. In this process, the saw is deflected like a bowl-like shape. A cross-section of the saw body then forms a circular arc. A curved line can therefore be cut without interference by the bowl-like deflection. In addition, the radius of the cross-section of the saw body can be controlled by adjusting the deflection. This process therefore allows curves to be cut with a varied radius using a single saw. This process can carry out high-speed curved-line cutting with a feed rate of 3 m/min on a CFRP plate. However, it is difficult to cut free-form curves using a flexible circular saw. Therefore, in this research, a new technique that can cut free-form curves using a flexible circular saw was proposed. Then, a cutting test applying the technique was carried out.