کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
10431728 910223 2015 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Mechanical characterization of stomach tissue under uniaxial tensile action
ترجمه فارسی عنوان
مشخصات مکانیکی بافت معده تحت اثر کششی یکسانی
کلمات کلیدی
معده بزاق، تست کششی، آرامش استرس، خارش پره شکستگی، ناهمسانگردی،
ترجمه چکیده
در این مقاله، خواص کششی دیوار معده با استفاده از آزمون بیومکانیک و تجزیه و تحلیل نظری مورد بررسی قرار گرفت. نمونه هایی از نوارهای گوشت خوک از انحنای کوچکتر و بزرگتر معده به ترتیب به ترتیب طولی و دور محاسبه می شوند. بارگذاری-تخلیه، استرس آرامش، خزش کرنش، آزمون شکستگی کششی به ترتیب در موکوسی-زیرموسی، عضله ساکارز و لایه ناقص انجام شد. نتایج نشان داد که خواص بیومکانیکی معده گوشتخوار بستگی به لایه ها، جهت ها و محل های دیواره معده دارد و ویژگی های مکانیکی ویسکوالاستیک، غیرخطی و خواص مکانیکی آنی است. در طی آزمایش بارگیری-تخلیه، استرس لایه عضله سرووز در جهت طولی 15-20٪ بیشتر از جهت سفتی در نسبت کشش 12٪ بود، در حالی که می توانست حدود 40٪ برای لایه ناقص و 50٪ برای لایه مخاطی-زیرموسی نتایج استراحت استرس و کشش کرنش نشان داد که درجه تغییرات به وضوح سریعتر از جهت مسیر طولی بود و مقادیر باقی مانده نهایی نیز برای لایه ها، جهت ها و مکان های مختلف متفاوت بود. در فرآیند تست شکستگی، لایه عضله سرواکسی اولا لایه مخاطی-زیرموکوسی بعد از آن که لایه ناقص مورد آزمایش قرار گرفت، لکه های محکم شده را پشت سر گذاشت، نوار های طولی اول به شکستگی رسیدند و مقدار استرس مورد نیاز حدود دو برابر همان مقدار در محیط نوارها ناهمسانگردی و ناهمگنی خصوصیات مکانیکی معده همراه با هندسه، ساختار و عملکرد آن پیچیده بود. نتایج به ما کمک می کند تا بیومکانیک بافت نرم نرم را درک کنیم.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی پزشکی
چکیده انگلیسی
In this article, the tensile properties of gastric wall were investigated by using biomechanical test and theoretical analysis. The samples of porcine stomach strips from smaller and greater curvature of the stomach were cut in longitudinal and circumferential direction, respectively. The loading-unloading, stress relaxation, strain creep, tensile fracture tests were performed at mucosa-submucosa, serosa-muscle and intact layer, respectively. Results showed that the biomechanical properties of the porcine stomach depended on the layers, orientations and locations of the gastric wall and presented typical viscoelastic, nonlinear and anisotropic mechanical properties. During loading-unloading test, the stress of serosa-muscle layer in the longitudinal direction was 15-20% more than that in the circumferential direction at 12% stretch ratio, while it could reach about 40% for the intact layer and 50% for the mucosa-submucosa layer. The results of stress relaxation and strain creep showed that the variation degree was obviously faster in the circumferential direction than that in the longitudinal direction, and the ultimate residual values were also different for the different layers, orientations and locations. In the process of fracture test, the serosa-muscle layer fractured firstly followed by the mucosa-submucosa layer when the intact layer was tested, the longitudinal strips firstly began to fracture and the required stress value was about twice as much as that in the circumferential strips. The anisotropy and heterogeneity of mechanical characterization of the porcine stomach were related to its complicated geometry, structure and functions. The results would help us to understand the biomechanics of soft organ tissue.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Biomechanics - Volume 48, Issue 4, 26 February 2015, Pages 651-658
نویسندگان
, , ,