Inductively coupled plasma optical emission spectrometric determination of trace element in PM10 airborne particulate matter collected in an industrial area of Argentina

Trace metals of relevance from the environmental and toxicological point of view were quantified in the city of Campana, Buenos Aires, Argentina. The collection of particulate matter was performed on ash-free fiber glass filters using high-volume samplers with a PM10 sampling head, during a 3-month period in 2002. An acid leaching of elements deposited on the filters was adopted paying special attention to the recovery of volatile elements. Analysis was performed by inductively coupled plasma optical emission spectrometry (ICP OES) to ascertain the concentrations of 12 key elements, namely, Al, As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn. The validation of the procedure was performed by the analysis of the standard reference material NIST 1648, urban particulate matter, and good agreement between concentrations found and the reported certified values was achieved. Blank filters were spiked with the analytes investigated and the recoveries varied between 83% and 92%. Metal concentrations spanned the range 0.03 ng m−3 (equivalent to 0.42 μg g−1) for Cd to 1.9 μg m−3 (equivalent to 29.7 mg g−1) for Fe. The results obtained show that the pollutants of special environmental and health concern are As and Pb. Mean As concentration was higher than the guideline value associated with an excess cancer risk of 1:10−6, reported by the World Health Organization (WHO). Lead is the only element that showed higher concentrations than those recently measured in the large and heavily trafficked metropolitan area of Buenos Aires. Cadmium>Pb>As>Zn>Cu are the elements more enriched in airborne PM10.