Experimental based full process simulation of alumina selective laser processed parts densified by cold isostatic pressing and solid state sintering

The compound process of cold isostatic pressing (CIP) of alumina selective laser processed (SLP) parts and solid state sintering (SSS) and its full process simulation were realized in this paper, focusing on studying the overall deformation, relative density distribution, grain growth and sintering stress variation during the process. Especially, correlation was established between the macroscopic deformation and microscopic evolution. Model parameters for alumina are presented, which were optimized in accordance with the experimental results. CIPed part still exhibited density inhomogeneity, of which SSS tended to increase the overall density and homogenize density distribution. The sintering behavior was studied with the employment of dilatometer experiments. Furthermore, compared with conventional heating strategy, fast firing turned out to decrease sintering production time as well as drive the matter diffusion and densification process. The master sintering curve (MSC) moves upward a little under the condition of fast firing.