کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10630021 | 991220 | 2005 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The reliability of polished porcelain stoneware tiles
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The flexural strength and the Young's modulus of as fired and polished porcelain stoneware tiles were investigated. Bending tests were carried out on suitable specimens, cut from five commercial products before and after polishing. The differences found in the flexural strength data were evaluated by the analysis of variance and the determination of the Weibull parameters. The results showed that: (i) the as fired tiles and the corresponding polished tiles cannot be always considered the same material and (ii) the data scattering is usually greater for the polished products, i.e., the reliability of the polished products, in terms of the Weibull modulus m, decreases. The results, supported by microstructural observations, surface roughness and Vickers hardness measurements, were directly attributed to the severe damage induced by the first step of machining, i.e., calibrating or grinding. Young's modulus data showed a clear dependence on the pre-existing porosity, i.e., the production process, rather than on the machining induced damage. It was also shown that the conditions and the characteristics of the polished working surfaces strongly depend on the microstructure of the as fired material.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 25, Issue 9, June 2005, Pages 1487-1498
Journal: Journal of the European Ceramic Society - Volume 25, Issue 9, June 2005, Pages 1487-1498
نویسندگان
Leonardo Esposito, Antonella Tucci, Daniele Naldi,