کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10638322 | 995415 | 2005 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of molybdenum ion implantation on the aqueous corrosion behavior of zirconium
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
مواد الکترونیکی، نوری و مغناطیسی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In order to study the effect of molybdenum ion implantation on the aqueous corrosion behavior of zirconium, specimens were implanted by molybdenum ions in the fluence range 1 Ã 1016 to 5 Ã 1017 ions cm-2 at maximum 160 °C, and at an extracted voltage of 40 kV. The valence of the surface layer was analyzed by X-ray photoemission spectroscopy. Three-sweep potentiodynamic polarization measurements were employed to value the aqueous corrosion resistance of zirconium in a 1N H2SO4 solution. Scanning electron microscopy (SEM) was performed for the three-sweep potentiodynamic polarized samples. It was found that the aqueous corrosion resistance of zirconium implanted with molybdenum declined with raising fluence. The greater is the implantation fluence, the bigger is the decline. And the natural corrosion potential of the implanted zirconium became more positive than that of the as-received zirconium. Finally, the mechanism of the corrosion resistance decline of the molybdenum-implanted zirconium is discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Chemistry and Physics - Volume 90, Issue 1, 15 March 2005, Pages 166-171
Journal: Materials Chemistry and Physics - Volume 90, Issue 1, 15 March 2005, Pages 166-171
نویسندگان
D.Q. Peng, X.D. Bai, B.S. Chen,