کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10655824 | 1005248 | 2005 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Preparation and characterisation of melt-spun Al-Cu-Fe quasicrystals
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The icosahedral Ï-Al65Cu20Fe15 phase forms by a peritectic reaction between the primary β-AlFe phase and the liquid, as the temperature decreases. At the later stages of cooling, the monoclinic λ-Al13Fe4 phase and the tetragonal θ-Al2Cu phase are formed in the cast alloys, as a result of peritectic reactions. In the rapidly solidified alloys, the formation of the tetragonal θ-Al2Cu phase and, in the case of alloy Al60Cu25Fe15, the monoclinic λ-Al13Fe4 phase is avoided, apparently due to high degree of undercooling. Thus, the production of single-phase quasicrystalline ribbons is not possible by the melt-spinning process, at least by using the cooling rate of 5-7Ã104 °C/s. In addition to phase selection, the degree on undercooling influences, for example, the composition of the Ï-Al65Cu20Fe15 phase and the grain morphology in melt-spun ribbons.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 13, Issue 8, August 2005, Pages 885-895
Journal: Intermetallics - Volume 13, Issue 8, August 2005, Pages 885-895
نویسندگان
Elina Huttunen-Saarivirta, Jyrki Vuorinen,