کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10672939 | 1010181 | 2016 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Using X-ray computed tomography to improve the porosity level of polyamide-12 laser sintered parts
ترجمه فارسی عنوان
با استفاده از توموگرافی کامپیوتری اشعه ایکس برای بهبود سطح تخلخل قطعات پلیمید-12 لیزر دندانی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
Porosity is a key parameter determining the functional application limits of polymeric parts produced by laser sintering (LS). In this paper, X-ray computed tomography (CT) is used to investigate the influence of the LS scanning parameters (laser power, hatch spacing, and scan speed) and part or feature size on the distribution and size of pores within polyamide-12 (PA12) laser sintered parts. CT model slices are created parallel to the original LS manufacturing layers in order to determine the porosity distribution and variation within each layer as well as along subsequent layers. Mapping the porosity distribution within these slices onto the laser scanning trajectory moreover allows investigating the influence of LS scanning parameters. Correlation of these porosity data with results from mechanical testing allows identifying optimal LS scanning parameters.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 65, Issue 1, 2016, Pages 205-208
Journal: CIRP Annals - Volume 65, Issue 1, 2016, Pages 205-208
نویسندگان
Wim Dewulf, Michele Pavan, Tom Craeghs, Jean-Pierre Kruth,