کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10672959 | 1010181 | 2016 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
New method for the manufacturing of curved workpieces by open-die forging
ترجمه فارسی عنوان
روش جدید برای تولید قطعات منحنی توسط قالب باز
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آهنگری، مینیاتور انعطاف پذیری، خم شدن
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
Open-die forging is an incremental bulk metal forming process usually applied for the production of straight workpieces with a symmetric cross-section. A new approach for the integrated open-die forging of curved workpieces is presented, in which the material flow is actively controlled by manipulator displacements. When these displacements are performed during forging strokes, a significant reduction of the bending force compared to conventional bending is achieved. This paper presents the integrated forging and bending process combining several individual forming steps to a forging pass. Based on numerical and experimental investigations, the influence of various process parameters on the workpiece curvature and geometry is discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 65, Issue 1, 2016, Pages 285-288
Journal: CIRP Annals - Volume 65, Issue 1, 2016, Pages 285-288
نویسندگان
Martin Wolfgarten, Gerhard Hirt,