کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673118 | 1010222 | 2012 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Heat partitioning in dry milling of steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A predictive model for heat induced shape deviations would facilitate the optimization of dry milling strategies. Results from milling experiments aiming at a physically based regression model for the heat flux distribution along the contact arc are presented. The contact arc was discretised by varying the width of cut on four levels for each combination of cutting speed, feed speed, and depth of cut. Heat fluxes to the workpiece were iteratively determined in an inverse procedure. Heat partitioning not only depends on the thermal number as in orthogonal cutting but also on the feed speed and the depth of cut.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 61, Issue 1, 2012, Pages 87-90
Journal: CIRP Annals - Volume 61, Issue 1, 2012, Pages 87-90
نویسندگان
Jens Sölter, Maxim Gulpak,