کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673166 | 1010222 | 2012 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dressing and truing of hybrid bonded CBN grinding tools using a short-pulsed fibre laser
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper presents the results of an investigation into the dressing and truing of hybrid bonded (metal-vitrified) CBN grinding wheels using a short-pulsed fibre laser. Truing of complex contours on CBN grinding tools with sharp edges (edge radii of less than 20 μm) could be successfully applied, whereas other dressing methods have been neither technically nor economically successful. Sharpening by laser can provide the same wheel surface topography which is conventionally produced by SiC and/or Al2O3 sharpening tools. Grinding characteristics and long-term performance of the laser-profiled tools are discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 61, Issue 1, 2012, Pages 279-282
Journal: CIRP Annals - Volume 61, Issue 1, 2012, Pages 279-282
نویسندگان
Christian Walter, Mohammad Rabiey, Maximilian Warhanek, Nicolas Jochum, Konrad Wegener,