کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673215 | 1010232 | 2009 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Application in milling of coated tools with rounded cutting edges after the film deposition
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Sharp cutting edges of coated tools are often rounded to increase their stability. In the described investigations coated cutting edges of cemented carbide inserts were variously rounded by grinding. The coating thickness distributions in the transient region between tool flank and rake were determined by an appropriate evaluation of ball cratering tests using confocal microscopy. The cutting performance of the tools was examined in milling at different cutting speeds and chip lengths, which were adjusted based on FEM calculations. The results demonstrated that even cutting edges with slightly revealed substrate can effectively withstand the cutting loads.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 58, Issue 1, 2009, Pages 61-64
Journal: CIRP Annals - Volume 58, Issue 1, 2009, Pages 61-64
نویسندگان
K.-D. Bouzakis, S. Gerardis, G. Katirtzoglou, S. Makrimallakis, A. Bouzakis, R. Cremer, H.-G. Fuss,