کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673276 | 1010232 | 2009 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Micro grinding tool for manufacture of complex structures in brittle materials
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper presents a novel micro shaft grinding tool with cylindrical tool tip diameter between 13 μm and 100 μm. The manufacturing of the tool itself is carried out on a prototype desktop machine. The shaping of the tool is accomplished by grinding the tool tip directly onto the cylindrical carbide tool shank. During tool grinding, the tool shank rotates in a micro spindle with air-lubricated bearings, leading to high concentricity and low run-out. The tool tip is electrically nickel plated with diamond grains. During first experimental tests of the tool, very low surface roughness values and sharp edges without burrs were achieved.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 58, Issue 1, 2009, Pages 311-314
Journal: CIRP Annals - Volume 58, Issue 1, 2009, Pages 311-314
نویسندگان
J.C. Aurich, J. Engmann, G.M. Schueler, R. Haberland,