کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673549 | 1010258 | 2008 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Model development for the prediction of surface topography generated by ball-end mills taking into account the tool parallel axis offset. Experimental validation
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Model development for the prediction of surface topography generated by ball-end mills taking into account the tool parallel axis offset. Experimental validation Model development for the prediction of surface topography generated by ball-end mills taking into account the tool parallel axis offset. Experimental validation](/preview/png/10673549.png)
چکیده انگلیسی
This paper presents a model for the topography prediction of ball-end milled surfaces, considering the tool parallel axis offset. First, the equations of cutting edge trajectories and the envelope equation of the material swept by the tool are derived. Later, the trajectories are cut by planes perpendicular to the feed direction obtaining a set of transcendental equations that are solved by transforming them to polynomial equations through Chebyshev expansions. This procedure presents the advantage on previous models in literature of not requiring any starting point to achieve the solution. Finally, experimental results are presented and compared to the model predictions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 57, Issue 1, 2008, Pages 101-104
Journal: CIRP Annals - Volume 57, Issue 1, 2008, Pages 101-104
نویسندگان
M. Arizmendi, J. Fernández, L.N. López de Lacalle, A. Lamikiz, A. Gil, J.A. Sánchez, F.J. Campa, F. Veiga,