کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673591 | 1010258 | 2008 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Process window enhancement for single point incremental forming through multi-step toolpaths
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Single point incremental forming (SPIF) suffers from process window limitations which are strongly determined by the maximum achievable forming angle. Forming consecutive, intermediate shapes can contribute to a significantly enlarged process window by allowing steeper maximum wall angles for a range of part geometries. In this paper an experimentally explored multi-step toolpath strategy is reported and the resulting part geometries compared to simulation output. Sheet thicknesses and strains achieved with these multi-step toolpaths were verified and contribute to better understanding of the material relocation mechanism underlying the enlarged process window.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 57, Issue 1, 2008, Pages 253-256
Journal: CIRP Annals - Volume 57, Issue 1, 2008, Pages 253-256
نویسندگان
J.R. Duflou, J. Verbert, B. Belkassem, J. Gu, H. Sol, C. Henrard, A.M. Habraken,