کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673913 | 1010266 | 2011 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mechanics of micro-milling with round edge tools
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper presents analytical prediction of micro-milling forces from constitutive model of the material and friction coefficient. The chip formation process is predicted with a slip-line field model which considers the strain hardening, strain-rate and temperature effects on the flow stress of the material. The cutting force coefficients are identified from series of slip-line field simulations at a range of cutting edge radii and chip loads. The predicted cutting force coefficients are used to simulate micro-milling forces. The proposed chain of predictive micro-milling model is experimentally proven by conducting brass cutting tests with a 200 μm diameter helical end mill.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 60, Issue 1, 2011, Pages 77-80
Journal: CIRP Annals - Volume 60, Issue 1, 2011, Pages 77-80
نویسندگان
Y. Altintas, X. Jin,