کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673917 | 1010266 | 2011 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Machinability and surface integrity of RR1000 nickel based superalloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Alloy development for gas turbine components has produced materials able to maintain strength and integrity at operating temperatures up to â¼1050 °C. Next-generation RR1000 nickel-based superalloy reflects this philosophy, albeit at the expense of machinability. Experimental data for drilling showed flank wear when operating at 45 m/min to be <100 μm for a distance cut of 1800 mm (150 holes). Thrust forces measured 1600-1800 N. Re-deposited material on hole surfaces and drag/distortion was evident on cross-sectional micrographs. Roughness of end-milled specimens was <0.8 μm Ra with minimal damage using new tools, however significant burring/increased microhardness (â¼150 HK0.05) and white layer formation occurred when employing worn tools.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 60, Issue 1, 2011, Pages 89-92
Journal: CIRP Annals - Volume 60, Issue 1, 2011, Pages 89-92
نویسندگان
S.L. Soo, R. Hood, D.K. Aspinwall, W.E. Voice, C. Sage,