کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10674027 | 1010266 | 2011 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Finishing of optical moulds to λ/20 by automated corrective polishing
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Tungsten carbide is widely used to make replication moulds for small aspheric and freeform optics, like camera lenses. Since aspheric generation by grinding generally fails to reach ultra-precision criteria, a time efficient method for finishing moulds is needed. Using a 7-axis CNC polishing machine, an on-machine tool forming technique and compensation software were developed to correctively polish a plano WC surface of diameter 25 mm from a form error above λ to below λ/20 (29 nm P-V) in under 1 h, while reducing roughness to 1.0 nm Ra. This automatic method and tooling are applicable to aspheric and freeform moulds.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 60, Issue 1, 2011, Pages 375-378
Journal: CIRP Annals - Volume 60, Issue 1, 2011, Pages 375-378
نویسندگان
A. Beaucamp, Y. Namba, I. Inasaki, H. Combrinck, R. Freeman,