کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10674523 | 1010322 | 2007 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Temperature Measurement of Cutting Edge in Drilling -Effect of Oil Mist-
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In drilling, the temperature of the cutting edges of a drill is measured using a two-color pyrometer with an optical fiber. A cemented carbide drill with a diameter of 10Â mm is used as a cutting tool, and carbon steel, cast iron and aluminum die-cast alloy are used as work materials. The temperature distribution along the cutting edge of a drill is measured and the influence of spindle speed and feed rate on the tool temperature is investigated. The maximum tool temperature is observed during the drilling of carbon steel. The effect of oil mist supplied from oil holes in the drill on the tool temperature is examined and the result is compared to that in turning and end milling. The temperature reduction in oil mist turning is approximately 5%, while in oil mist end milling it is 10-15% and that in oil mist drilling is 20-25% compared to the temperature in dry cutting.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 56, Issue 1, 2007, Pages 93-96
Journal: CIRP Annals - Volume 56, Issue 1, 2007, Pages 93-96
نویسندگان
T. Ueda, R. Nozaki, A. Hosokawa,