کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10674534 | 1010322 | 2007 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Heat Flow Simulation for Dry Machining of Power Train Castings
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Heat Flow Simulation for Dry Machining of Power Train Castings Heat Flow Simulation for Dry Machining of Power Train Castings](/preview/png/10674534.png)
چکیده انگلیسی
Dry machining of power train components (eg. cylinder blocks, heads) is very challenging. High heat input due to the lack of coolant can result in an inhomogeneous temperature distribution leading to omni directional distortion. This distortion can be calculated using FEM simulation. It requires however a detailed knowledge about the heat input of each operation. So far this can only be determined by extensive experiments. The aim of this paper is to present a model describing the heat input as a function of cutting parameters and tool geometry. Based on this model the heat input can be calculated. This allows the simulation and optimization of the operation sequence.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 56, Issue 1, 2007, Pages 117-122
Journal: CIRP Annals - Volume 56, Issue 1, 2007, Pages 117-122
نویسندگان
J. Fleischer, R. Pabst, S. Kelemen,