Biodegradable honeycomb-patterned film composed of poly(lactic acid) and dioleoylphosphatidylethanolamine

Honeycomb-patterned films have been reported to be useful for scaffolds of cell culture in tissue engineering. In the present study, we investigated a new compound, dioleoylphosphatidylethanolamine (DOPE), a naturally derived phospholipid having unsaturated fatty acid moieties, as a surfactant for fabricating honeycomb-patterned poly(d,l-lactide) (PLA) film. Only DOPE among commercially available phospholipids was useful as a surfactant, and it showed good solubility in PLA/chloroform solution and an excellent property for fabricating honeycomb-patterned film (the concentration of DOPE was from 0.2% to 20% by weight based on the weight of PLA). The pore size of the honeycomb was uniform, and all pores were interconnected with each other. The contact angle of water on the honeycomb-patterned film was affected by the amount of DOPE. Time-of-flight secondary ion mass spectrometer (TOF-SIMS) data suggested that DOPE was concentrated on the surface of the honeycomb-patterned film. To investigate cell proliferation and adhesion on the honeycomb-patterned film, NIH3T3 fibroblast cells were cultured on the film. The NIH3T3 cells adhered well on the honeycomb-patterned PLA film with DOPE (PLA–DOPE) and showed good cell proliferation compared to that on honeycomb-patterned PLA film fabricated with a copolymer (CAP) of dodecylacrylamide and ωω-carboxyhexylacrylamide (PLA–CAP).These results suggest that the honeycomb-patterned PLA–DOPE can be applicable as a scaffold for cells with better profiles in comparison with PLA–CAP.