کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1096234 | 1487444 | 2012 | 10 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Estimating spine shape in lateral sleep positions using silhouette-derived body shape models Estimating spine shape in lateral sleep positions using silhouette-derived body shape models](/preview/png/1096234.png)
This study aims at evaluating spinal alignment during sleep by combining personalized human models with mattress indentation measurements. A generic surface model has been developed that can be personalized based on anthropometric parameters derived from silhouette extraction. Shape assessment of the personalized surface models, performed by comparison with 3-D surface scans of the trunk, showed a mean unsigned distance of 9.77 mm between modeled and scanned surface meshes. The surface model is combined with an inner skeleton model, allowing the model to simulate distinct sleep postures. An automatic fitting algorithm sets the appropriate degrees of freedom to position the model on the measured indentation according to the adopted sleep posture. Validation on lateral sleep positions showed good intraclass correlations (0.73–0.88) between estimated and measured angular spinal deformations, indicating that silhouette-derived body shape models provide a valuable tool for the unobtrusive assessment of spinal alignment during sleep.Relevance to industry: A common drawback of the available techniques to assess spinal deformation on bedding systems is that they interfere with the actual sleep process. The current study presents a novel method based on silhouette-derived body shape models in order to estimate spine shape during sleep unobtrusively.
► A novel method is presented to estimate spine shape during sleep unobtrusively.
► Silhouette-derived body shape models were used.
► The models were fitted in the measured mattress indentation to estimate spine shape.
► Validation showed good agreement between estimated and measured angular spinal deformations.
Journal: International Journal of Industrial Ergonomics - Volume 42, Issue 5, September 2012, Pages 489–498