Whole-body vibration exposure experienced by motorcycle riders – An evaluation according to ISO 2631-1 and ISO 2631-5 standards

Riders of twelve motorcycles, comprising 6 full-scale motorbikes and 6 motor-scooters, and 5 sedan vehicles, performed test runs on a 20.6 km paved road composed of 5 km, 5 km, and 10.6 km of rural, provincial and urban routes, respectively. Each test run of motorcycle was separately performed under speed limits of 55 km/h and 40 km/h. Tri-axial accelerations of whole-body vibration (WBV) were obtained by using a seat pad and a portable data logger, and the driver's view was videotaped with a portable media recorder. Root mean square (RMS) acceleration, 8-h estimated vibration dose value (VDV(8)) and 8-h estimated daily dose of static compression dose (Sed) were determined from the collected data in accordance with ISO 2631-1 and ISO 2631-5 standards. Experimental results indicate that the WBV values of the sedan vehicle drivers have low RMS, VDV(8) and Sed values (RMS 0.27–0.32 m/s2; VDV(8) 6.3–8.3 m/s1.75; Sed 0.21–0.26 MPa). However, over 90% of the motorcycle riders had VDV(8) (mean 23.5 m/s1.75) exceeding the upper boundary of health guidance caution zone (17 m/s1.75) recommended by ISO 2631-1, or had Sed (mean 1.17 MPa) exceeding the value associated with a high probability of adverse health effects (0.8 MPa) recommended by ISO 2631-5. Over 50% of the motorcycle riders reached these boundary values for VDV and Se in less than 2 h. The WBV exposure levels of the full-scale motorbikes riders and motor-scooter riders were not significantly different. However, the RMS and VDV(8) values of motorcycle riders indicate significant roadway effect (p < 0.001), while their Sed values indicate significant speed limit effect (p < 0.05). This study concludes that the WBV exposure levels of common motorcycle riders are distinctively higher than those of sedans, even on a regular paved road. The impact on health of WBV exposure in motorcycle riders should be carefully addressed with reference to ISO 2631-1 and ISO 2631-5.Relevance to industryThis study compares the predicted health risks of motorcycle riders according to ISO 2631-1 and ISO 2631-5 standards. Experimental data suggest that the vibration dose value of ISO 2631-1 and daily dose of equivalent static compression stress of ISO 2631-5 have roughly equivalent boundaries for probable health effects.