کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
11007148 | 1519220 | 2018 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mechanical behavior of 7085-T7452 aluminum alloy thick plate joint produced by double-sided friction stir welding: Effect of welding parameters and strain rates
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Mechanical behavior of double-sided friction stir welding (DS-FSW) aluminum alloy thick plate joints under various rotational rates and welding speeds tested at different strain rates were investigated. The results show that both the yield stress (YS) and the elongation to failure of DS-FSW joints increase, but the ultimate tensile strength (UTS) of defect-free joints decrease with the decrease of strain rate from 10â2 sâ1 to 10â5 sâ1. A remarkable reduction in the YS, UTS and elongation to failure presents, particularly at the top slice of 950/60 joint, reaching approximately 65%, 68% and 25% of the BM tested at a strain rate of 10â4 sâ1and fails through brittle fracture. The top slice presents the highest strength and the middle slice has the largest ductility, the same as change laws of joint efficiency and strain hardening behavior among three slices. The best welding parameters is the rotational rate of 300ârpm and welding speed of 60âmm/min due to the higher and the smaller fluctuation of strength and ductility for different slices.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Manufacturing Processes - Volume 35, October 2018, Pages 261-270
Journal: Journal of Manufacturing Processes - Volume 35, October 2018, Pages 261-270
نویسندگان
Weifeng Xu, Huan Wang, Yuxuan Luo, Wenjun Li, M.W. Fu,