کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
11020069 1717613 2018 35 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
On the role of precipitates in controlling microstructure and mechanical properties of Ag and Sn added 7075 alloys during artificial ageing
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
On the role of precipitates in controlling microstructure and mechanical properties of Ag and Sn added 7075 alloys during artificial ageing
چکیده انگلیسی
Tailoring size, density and nature of precipitates by ageing and alloy additions and subsequent correlation with microstructure and mechanical properties for 7075 alloys was investigated in current research. The effect of the minor addition of Ag and Sn in 7075 base alloy has been revealed using optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). The hardness and tensile testing were carried out as a part of mechanical properties evaluation. Under peak age condition (T6), even a minor addition of Ag and Sn was found to decrease the average grain size and impart uniformity in the pattern of the dispersed intermetallic phases in the matrix compared to base 7075 alloy. The enhancement of precipitation kinetics owing to the addition of Ag and Sn in AA 7075 has been confirmed by the results obtained from DSC. Johnson-Mehl-Avramani (JMA) equation was used to calculate the amount of precipitates, its kinetics of formation and activation energies of each phase at different temperatures. It demonstrated that activation energies of phases (GP zone dissolution and η′) for Ag bearing alloy were decreased which suggested that Ag possessed a positive effect on the early decomposition of GP zone and η′ precipitates. In the effort to explain the higher strength and ductility with Ag and Sn added alloys, the microstructural attributes in the form of generation of more heterogeneous nucleation sites coupled with a high density of fine η′ precipitation throughout in the matrix, observed through TEM investigation, was accounted responsible. The average interparticle spacing among the η′ precipitates was found lowest in Ag containing alloys which have a beneficial effect on improvement of mechanical properties. Fracture surfaces revealed transgranular type which occurred by propagating the cracks through the grains. Fine equiaxed dimples were present inside the surface of the fibrous fracture surfaces suggesting appreciable ductility for all peak aged alloys. Finer dimples were observed in Ag containing alloys due to its fine grain size.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 738, 19 December 2018, Pages 399-411
نویسندگان
, , ,