Pulsed laser powder bed fusion additive manufacturing of A356

A356 (Al7SiMg) specimens were fabricated through pulsed laser powder bed fusion (P-LPBF) additive manufacturing. Microstructural examinations and analyses were carried out through the usage of light optical microscopy (LOM), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). The results revealed a fine cellular microstructure with the intercellular network consisting of Al cells and defined by a network of Si arms. The Al cells at the center of the melt pools and within the melt pool boundary bands were measured to be 423 ± 49 nm and 664 ± 76 nm, respectively. The presence of a fine columnar grain structure and epitaxial growth on partially melted grains was observed and explained by the KGT model and Hunt's criterion.