کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
11026774 | 1666350 | 2018 | 33 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermal and mechanical properties of soda lignin/HDPE blends
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Environmental friendlier polymer blends are targeted by the packaging and automotive industry at comparable or lower cost through the use of renewable resources. Non-wood soda (sulfur-free) lignin was blended with high density polyethylene (HDPE) at 10, 20 and 30% w/w at the mixing temperature of 150â¯Â°C which is approximately: 20â¯Â°C above the melting point of HDPE, 20â¯Â°C above softening temperature of lignin and 20â¯Â°C below degradation temperature of lignin. Addition of soda lignin to HDPE matrix at a proper processing temperature resulted in blends with improved tensile and flexural strength as well as the moduli (Young's and flexural) compared to the properties of virgin HDPE. Thermal studies showed that the melting temperature and degradation temperature of the blends were decreased by addition of lignin. Maleic anhydride-grafted-polyethylene (MAPE) was used as compatibilizer in the blends, however the mechanical properties of the blends were not improved by addition of MAPE.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 115, December 2018, Pages 104-111
Journal: Composites Part A: Applied Science and Manufacturing - Volume 115, December 2018, Pages 104-111
نویسندگان
Javad Sameni, Shaffiq A. Jaffer, Mohini Sain,