کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
11032139 | 1645675 | 2018 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Lattice parameter evolution during heating of Ti-45Al-7.5Nb-0.25/0.5C alloys under atmospheric and high pressures
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Lattice strain evolution during deformation processing of Ti-Al alloys at high temperature is important in terms of its microstructural evolution and microstructural stability. It is shown here that careful evaluation of lattice parameters is critical for the understanding of thermal expansion, crystallographic order, chemical composition and response to pressure, allowing to identify phase transitions and segregation, in addition to the measurement of the more conventional quantities phase composition and order parameter. The lattice parameters of Ti-45Al-7.5Nb-0.25/0.5C (at. %) alloys were calculated using both Rietveld and single peak fitting methods from data obtained by in-situ synchrotron diffraction experiments at high temperature under atmospheric and high pressure respectively. The lattice strain evolution as a function of temperature in a Ti-45Al-7.5Nb-0.25C (at. %) alloy under high pressure was compared with that of a Ti-45Al-7.5Nb-0.5C (at. %) alloy heated under atmospheric pressure. The contribution of each of the four lattice strain factors is semi-quantitatively assessed in the temperature range investigated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 102, November 2018, Pages 120-131
Journal: Intermetallics - Volume 102, November 2018, Pages 120-131
نویسندگان
Xi Li, Rian Dippenaar, Ayumi Shiro, Takahisa Shobu, Yuji Higo, Mark Reid, Hiroshi Suzuki, Koichi Akita, Ken-Ichi Funakoshi, Klaus-Dieter Liss,