Automated process planning method to machine A B-Spline free-form feature on a mill–turn center

In this paper, we present a methodology for automating the process planning and NC code generation for a widely encountered class of free-form features that can be machined on a 3-axis mill–turn center. The free-form feature family that is considered is that of extruded protrusions whose cross-section is a closed, periodic B-Spline curve. In this methodology, for machining a part with B-Spline protrusion located at the free end, the part is first rough turned to the maximum profile diameter of the B-Spline, followed by rough profile cutting and finish profiling with axially mounted end mill tools. The identification and sequencing of machining volumes is completely automated, as is the generation of actual NC code. The approach supports both convex and non-convex profiles. In the case of non-convex profiles, the process planning algorithm ensures that there is no gouging of the work piece by the tool. The algorithm also identifies when sections of the tool path lie outside the work piece and utilizes rapid traverses in these regions to reduce cutting time. This methodology presents an integrated turn–mill process planning where by making the process fully automated from design with no user intervention making the overall process planning efficient. The algorithm was tested on several examples and test parts using the unmodified NC code obtained from the implementation were run on a Moriseiki mill–turn center. The parts that were produced met the dimensional specifications of the desired part.