Microstructures and hydrogen storage properties of as-cast and copper-mould-cast LaMg4Ni alloys

Phase compositions, morphologies and hydrogen storage properties of the as-cast and copper-mould-cast LaMg4Ni alloys were studied. The dehydriding onset temperature of the as-cast alloy hydride was about 500 K, which was at least 50 K higher than that of the copper-mould-cast one, and the copper-mould-cast alloy hydride had a faster dehydriding rate compared with as-cast one. Additionally, the copper-mould-cast alloy could uptake 2.85 wt.% hydrogen, which was 95.0% of saturated hydrogen storage capacity at room temperature. While only 1.80 wt.% hydrogen (60% of saturated capacity) was absorbed for the as-cast alloy under the same conditions. The reversible hydrogen storage capacities and plateau hydrogen pressures of the two alloys were close. X-ray diffractions and scanning electron microscopy results indicated that similar thermodynamic property of the two alloys should be ascribed to the same hydrogen storage phase, Mg and Mg2Ni. The better hydrogen sorption kinetics of copper-mould-cast alloy should be ascribed to the more uniform phase distribution compared with that of the as-cast one.

TPD curves of as-cast and copper-mould-cast LaMg4Ni alloysFigure optionsDownload as PowerPoint slide