Determination of the interface energy level alignment of a doped organic hetero-junction using capacitance–voltage measurements

A simple method based on capacitance–voltage (C–V) measurements is reported to determine the interface energy level alignment at the junction of 15 mol% Cs2CO3 doped 4,7-diphenyl-1,10-phenanthroline (BPhen) and 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile (HATCN) fabricated under high vacuum. The junction properties, such as the depletion layer thickness, built-in potentials and vacuum level shift were calculated with simple Mott–Schottky and Poisson’s equations with the boundary condition of a continuous electric flux density using the information from the C–V data. The interface energy level alignment determined by this method is well matched with the one determined using the in situ ultraviolet photoemission spectroscopy (UPS) and X-ray photoemission spectroscopy (XPS) experiments performed under ultra-high vacuum. This method can be applied to other semiconductor junctions such as the organic p–n homojunctions and heterojunctions with known energy levels, as long as the metal/semiconductor contact is Ohmic without referring to the photoemission spectroscopies. Moreover, the energy level alignment determined by the C–V measurement gives a more realistic result since the films for the measurements are formed under high vacuum which is a normal device fabrication environment rather than under ultra high vacuum.

Figure optionsDownload as PowerPoint slideHighlights
► Interface energy alignment at an O/O junction is determined using C–V measurements.
► UPS and XPS experiments confirm the interface energy alignment at an O/O junction.
► Different fabrication environments result in different energy level alignments.