کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1265265 | 972207 | 2013 | 6 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: An ultrasonic-accelerated oxidation method for determining the oxidative stability of biodiesel An ultrasonic-accelerated oxidation method for determining the oxidative stability of biodiesel](/preview/png/1265265.png)
Biodiesel is considered an alternative energy because it is produced from fats and vegetable oils by means of transesterification. Furthermore, it consists of fatty acid alkyl esters (FAAS) which have a great influence on biodiesel fuel properties and in the storage lifetime of biodiesel itself. The biodiesel storage stability is directly related to the oxidative stability parameter (Induction Time – IT) which is determined by means of the Rancimat® method. This method uses condutimetric monitoring and induces the degradation of FAAS by heating the sample at a constant temperature. The European Committee for Standardization established a standard (EN 14214) to determine the oxidative stability of biodiesel, which requires it to reach a minimum induction period of 6 h as tested by Rancimat® method at 110 °C. In this research, we aimed at developing a fast and simple alternative method to determine the induction time (IT) based on the FAAS ultrasonic-accelerated oxidation. The sonodegradation of biodiesel samples was induced by means of an ultrasonic homogenizer fitted with an immersible horn at 480 Watts of power and 20 duty cycles. The UV–Vis spectrometry was used to monitor the FAAS sonodegradation by measuring the absorbance at 270 nm every 2. Biodiesel samples from different feedstock were studied in this work. In all cases, IT was established as the inflection point of the absorbance versus time curve. The induction time values of all biodiesel samples determined using the proposed method was in accordance with those measured through the Rancimat® reference method by showing a R2 = 0.998.
► A simple and fast way to assess the biodiesel oxidative stability is proposed.
► The proposed method uses an ultrasonic-accelerated oxidation.
► The UV–Vis spectrophotometric technique was used to monitor the FAAS sonoxidation.
► The proposed method results are in good agreement with the Rancimat® reference method.
► Results of the proposed and Rancimat® reference methods presented a good agreement.
Journal: Ultrasonics Sonochemistry - Volume 20, Issue 3, May 2013, Pages 820–825