Optimized circuit design for flexible 8-bit RFID transponders with active layer of ink-jet printed small molecule semiconductors

We ink-jet print a blend of 6,13-bis(triisopropyl-silylethynyl)pentacene and polystyrene as the active layer for flexible circuits. The discrete ink-jet printed transistors exhibit a saturation mobility of 0.5 cm2 V−1 s−1. The relative spread in transistor characteristics can be very large. This spread is due to the morphology of the TIPS-PEN crystals, and is difficult to control using inkjet printing. Here we apply a novel circuitry design to minimize the probability of differences between the transistors. We include up to four transistors under the same ink-jet printed deposit. With the new design, we demonstrate unipolar circuitry building blocks such as inverters, NANDs and 19-stage ring-oscillators. Additionally, we integrate almost 300 TFTs, on a surface area of 34 mm2 of plastic foil, for 8-bit RFID transponder circuits.

Figure optionsDownload as PowerPoint slideHighlights
► Ink-jet printed co-planar TIPS-PEN:polymer transistors on flexible foils.
► Novel circuitry design to increase stability of unipolar circuitry.
► Each logic gate, up to four TFTs, under one IJP OSC deposit.
► Demonstration of faster ring oscillators with decreased footprint.
► Demonstration of IJP 8-bit RFID transponder circuits on plastic foil.