Effects of divalent cations on the formation and structure of solid supported lipid films

The interaction of glassy carbon-supported thin wetting films of lecithin with some divalent cations is investigated by impedimetry and voltammetry. The influence of Ca2+, Mg2+, and Mn2+ on the film structure is explored in two different cases — the divalent cations are added to the electrolyte either before or after the formation of the film. When the film has been previously formed, the addition of divalent cations in millimolar concentrations leads to changes in the passive electrical parameters and the blocking properties of the films. On the one hand the dielectric properties of the film measured in 0.1 M KCl seem to improve after the interaction with divalent cations — the film capacitance decreases, the resistance and resistivity of the film increase. On the other hand the increase of the redox current in the presence of 1 mM Fe(CN)63−/4− in the electrolyte suggests the formation of some defects in the lipid structure of the film after the action of divalent cations. It is shown that the amount of these defects could be significantly decreased when the divalent cations are present in the electrolyte solution before the film formation. The effect of divalent cations on the film stability is tested by applying negative potential to the film. In 0.1 M KCl the films are not stable at potential of − 0.8 V (vs. Ag/AgCl) and are destroyed. The addition of divalent cations stabilizes the films and at certain millimolar concentrations the films remain intact after the action of the negative potential. The effect of Mn2+ is more pronounced, the Ca2+ and Mg2+ have smaller commensurate effect. It is proposed that the changes in the films’ properties could be related with more tight packing of the lipid molecules with the divalent cations inserted in the film and that some defects could be opened during the rearrangement of the lipids when the film has been previously formed.